1PCS ESP8266 ESP-12F Development Board Internet NodeMCU WiFi Serial Wireless Module NodeMCU-12F CP2102 Based on ESP8266 WiFi Module

About this item

• •Description
• •Steps of How to use:
• •1. Download the motherboard, the latest version.
• •2. Install the IDE
• •3. Set up your board as: Go to File.Preferences and copy the URL below to get the ESP board manager extensions:
• •http://ardu-ino.esp8266.com/stable/package_esp8266com_index.json.Placing the http:// before the URL lets the board use it.Otherwise it gives you a protocol error.
• •4. Go to Tools > Board > Board Manager> Type ""esp8266"" and download the Community esp8266 and install.
• •5. Set up your chip as:
• •Tools -> Board -> NodeMCU 1.0 (ESP-12E Module)
• •Tools -> Flash Size -> 4M (3M SPIFFS)
• •Tools -> CPU Frequency -> 80 Mhz
• •Tools -> Upload Speed -> 921600
• •Tools-->Port--> (whatever it is)
• •6. Download and run the 32 bit flasher exe at Github(Search for nodemcu/nodemcu-flasher/tree/master/ at Github)
• •github.com/nodemcu/nodemcu-flasher/tree/master/Win32/Release Or download and run the 64 bit flasher exe at: github.com/nodemcu/nodemcu-flasher/tree/master/Win64/Release
• •7. In board, look for the old fashioned Blink program. Load, compile and upload.
• •8. Go to FILE> EXAMPLES> ESP8266> BLINK, it will start blinking.
• •Firmware link: http://github.com/nodemcu/nodemcu-firmware
• •The Data download access to the website: http://www.nodemcu.com
• •Test Video:http://www.youtube.com/watch?v=Gh_pgqjfeQc
• •Package including:
• •1 x ESP8266 ESP-12F NodeMcu development board

Specifications