5PCS 3D Printer TMC2209 V3.0 Stepper Motor Driver, TMC2209 Stepper Driver Module with Heat Sink Mute Drive 256 Microsteps for 3D Printer Controller Boards SKR V1.3 MKS GEN L Ramps 1.4/1.5/1.6

About this item

• •Feature:
• •Working Mode: Dir Step
• •Microplver: 1/256
• •Microplyer Mode: Up to 256
• •Driver Current: Up to 2A
• •Motor voltage: 5.5V-28V
• •Logic voltage: 3.3V-5V
• •Decibel: <10dB
• •RSense: 0.11 Ohm
• •Stealthchop(quiet): Yes
• •Spreadcyle: Yes
• •Motor Phase Current: 1.7A RMS, 2.8A Peak
• •TMC2209 V3.0 single-axis stepper motor drive chip, power tube built-in drive current 1.7A peak .
• •Mute technology.Support Single Wire UART for advanced configuration options.
• •Integrated Pulse Generator for standalone motion.
• •default value: 1V (+0.2); MAX: 2V; MIN: 0V
• •Rotating potentiometer must not use too much force to prevent irreversible damage to the potentiometer
• •when the counter-clockwise rotation reaches the maximum, if it continues to rotate, it will become the minimum
• •similarly, when the clockwise rotation reaches the minimum, if it continues to rotate, it will become the maximum
• •Attention :
• •Make sure to do a good job in heat dissipation (heat sink + heat dissipation fan) before driving to prevent abnormal operation of the drive.
• •The heat sink directly affixed to the IC, pay attention to the heat sink and pin spacing, or will be made the heatsink is connected with each pin to cause a short circuit.
• •Package Included:
• •5 X TMC2209 V3.0
• •5 X Heat Sink
• •5 X Screwdriver

Specifications