DAOKAI HX711 Weight Sensor ADC Module Kit + Digital Load Cell 5KG for Electronic Scale also for Arduino, with Scale Display Module, 3.5x1.35mm Power Wire

About this item

• •HX711 Module:
• •This is a 24-bit A/D converter chip specially designed for high-precision load cells, with two analog channel inputs and an internal integrated 128 times gain programmable amplifier
• •Operating voltage range: 2.6 ~ 5.5V
• •Operating temperature range: -20 ~ +85℃
• •The output data rate of 10Hz or 80Hz can be selected;
• •Simultaneously suppress 50Hz and 60Hz power interference;
• •Load cell 5KG：
• •4 leads, easy to use, It adopts 5-10V driving voltage, and directly outputs the voltage signal due to the change of force.
• •Connect：
• •Red to E+ / Black to E- / Green to A+ / White to A-
• •Features:
• •Two selectable differential input channels.
• •On-chip active low noise PGA with selectable gain of 64 and 128.
• •On-chip power supply regulator for load-cell and ADC analog power supply.
• •On-chip oscillator requiring no external component with optional external crystal.
• •On-chip power-on-reset.
• •Simple digital control and serial interface: pin-driven controls, no programming needed.
• •Selectable 10SPS or 80SPS output data rate.
• •Simultaneous 50 and 60Hz supply rejection.
• •Current consumption including on-chip analog power supply regulator: normal operation andlt; 1.5mA power down andlt; 1uA
• •Package Included:
• •1 x Weight Sensor 5KG
• •1 x HX711 24BIT Precision AD Module
• •5 x Nylon Guide Column
• •2 x Alec Disc
• •2 x M3x10 Screws
• •1 x 4PIN Female-FeMale Cables
• •1 x 3.5mm x 1.35mm Power Cable
• •1 x Scale Display Module

Specifications

You might also like

Quick add

Labasics

Labasics Lab Stand, 7.87 x 5.12 inch Cast Iron Support Ring Stand with 22.8 inch Rod for Laboratory

★★★★★