DollaTek 10Pcs nRF24L01+ Wireless Module 2.4G Wireless Communication Module Upgrade Module compatible with Arduino

About this item

• •This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost!!
• •This module can achieve a good balance between wireless transition performance and cost!
• •You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system!
• •Features:
• •2Mbit/s, 1Mbit/s, 250Kbit/s, three selectable transmission rate.
• •MultiCeiver hardware and six receiver functions.
• •2 Mbit/s make high-quality VoIP is possible.
• •+/- 60 ppm crystal.
• •Only require an external inductor in the antenna matching
• •There is no need multi-layer PCB.
• •5V tolerance level inputs.
• •Improved ShockBurst and the serial interface can be easy to connect with a variety of low-cost MCU.
• •There si no need SPI interface with the MCU.
• •Received in the rate of 2Mbit/s, the peak current is 12.5mA.
• •When the rate of 2Mbit/s @ 0dBm output,the peak current is 11mA.
• •Power-down mode, power consumption is 400nA.
• •Standby mode, power consumption is 32uA.
• •130us fast switching and wake time.
• •With voltage regulator:Oltage regulators on board.
• •Built-in 2.4GHz antenna,support up to six channels of data reception.
• •Low operating voltage: 1.9-3.6V
• •Small size:15*29mm
• •Package include:
• •10x NRF24L01+ Wireless Transceiver Module

Specifications